Insulated Panel System
Cold Room Anti-Slip Aluminum Panel
Cold room anti-slip aluminum panel for floor protection, safer walking, cart movement, and durable cold room operation in wet or busy storage environments.
Cold Room Anti-Slip Aluminum Panel Engineering Overview
Cold room anti-slip aluminum panel is used where workers enter the room, carts move through the doorway, or the floor may become wet from food handling, condensation, or cleaning. The surface improves safety and protects the insulation or floor structure below.
Floor selection should consider walking safety, wheel load, cleaning, corrosion, temperature, threshold height, drainage, and installation method. A thin surface plate may be enough for light use, while heavier traffic requires a stronger floor system.
JiangNan can supply anti-slip aluminum floor materials with cold room panels, doors, and full room packages. The quotation should show whether the customer needs plate only, insulated floor panel, or a complete floor build-up.
Insulation Performance
Embossed aluminum gives a stronger walking surface than smooth metal and helps reduce slip risk. In freezer rooms, joint sealing and threshold details remain important.
Joint and Sealing
Water and cleaning liquid should not enter floor joints. For low-temperature rooms, joint gaps can also create frost and hygiene problems.
Surface Selection
Aluminum is light and corrosion-resistant in many applications, but seafood salt, chemicals, and heavy mechanical traffic should be reviewed before final selection.
Export Handling
Panel length, stack height, protective film, forklift access, and container loading should be checked before production. This avoids damage during long-distance shipment.
Technical Specifications
| Panel Thickness | aluminum plate or floor panel configuration by project load and insulation build-up |
|---|---|
| Steel Thickness | not standard steel skin; aluminum tread plate thickness by order |
| PU Density | depends on backing insulation if supplied as composite floor panel |
| Thermal Conductivity | depends on insulation layer when used as composite floor panel |
| Fire Rating | by aluminum surface and insulation backing specification |
| Joint Type | floor plate joint, overlap, sealed joint, or customized floor panel connection |
| Available Width | customized by plate size, floor panel size, or installation layout |
| Maximum Length | customized by shipment and handling |
| Surface Materials | embossed anti-slip aluminum, optional insulation backing, or project-specific floor surface |
| Operating Temperature | chiller and freezer floors according to full floor design |
| Main Use | cold room floor, walk-in freezer floor, wet processing area, restaurant cold room, and anti-slip access zones |
| Export Packing | protective film, stacked packing, accessory labels, and container loading plan |
Related Cold Room Anti-Slip Aluminum Panel Projects
Czech Republic Frozen Storage
Temperature: -18C
Room size: 6 × 8 × 2.8 m
Panel thickness: 150 mm
Frozen storage using thicker insulation, freezer door sealing, and low-temperature refrigeration equipment.
Argentina Seafood Cold Room
Temperature: -25C
Room size: 8 × 10 × 3 m
Panel thickness: 150 mm
Seafood storage project focused on corrosion-resistant surfaces, stable pull-down, and careful packing for export.
Supermarket Cold Room
Temperature: 0C to 5C
Room size: 4 × 6 × 2.6 m
Panel thickness: 100 mm
Back-of-store chilled room for dairy, beverage, produce, and daily replenishment operation.
Pharmaceutical Cold Storage
Temperature: 2C to 8C
Room size: custom
Panel thickness: 100 mm
Temperature-stable room layout with controlled access, reliable sealing, and clear maintenance space.
Walk-in Freezer Project
Temperature: -18C
Room size: custom
Panel thickness: 120 to 150 mm
Small and medium freezer room reference for restaurants, distributors, and frozen food storage.
Request a Cold Room Anti-Slip Aluminum Panel Quotation
Send your room size, target temperature, stored product, daily loading, voltage, and destination country. JiangNan will provide a practical configuration suggestion and quotation within 24 hours.
Panel Thickness Selection Guide
The thickness guide below is a practical starting point for cold room quotation. Final selection should consider room size, ambient temperature, door opening frequency, stored goods, product entering temperature, equipment load, and local energy cost.
| Panel Thickness | Recommended Temperature Range |
|---|---|
| 50 mm | +10C to +15C service rooms, processing rooms, or areas with low temperature difference |
| 75 mm | 0C to +10C chilled rooms, fruit rooms, dairy rooms, and beverage rooms |
| 100 mm | -18C to 0C medium-temperature storage or energy-saving chilled rooms |
| 150 mm | -35C to -18C freezer rooms, seafood storage, meat storage, and high ambient sites |
| 200 mm | below -35C or special low-temperature projects after engineering confirmation |
For cold room floors, surface plate, insulation layer, vapor barrier, and civil floor should be considered as a system rather than separate items.
Applications
Seafood Cold Storage
Requires low-temperature insulation, corrosion-aware surfaces, and careful panel sealing around doors and floor joints.
Meat Processing
Needs hygienic surfaces, impact protection, reliable corner connection, and thickness selected for chilled or frozen operation.
Dairy Storage
Usually uses chilled temperature, easy-clean surface, stable panel joints, and good door sealing for frequent access.
Vegetable Storage
Requires correct temperature range, airflow planning, and surface material that can handle humidity and cleaning.
Pharmaceutical Cold Room
Requires stable insulation, controlled access, clean inner surface, and reliable room envelope performance.
Logistics Warehouse
Needs stronger surface options, long panels where suitable, and careful coordination with sliding doors and dock areas.
Manufacturing, Packaging, and Loading Details
JiangNan checks panel production, surface material, joint forming, core bonding, trimming, labeling, packing, and container loading as one workflow. For export customers, this is important because damaged panels, missing accessories, or unclear labels can delay site installation.
Production Control
Floor panels or plates should be cut, protected, and packed according to room layout. Edge protection is important because bent plates can be difficult to install flat.
Packaging Control
Panels should be stacked by type and length, protected from surface scratches, and loaded according to container balance. Doors, accessories, corner parts, sealant, and small hardware should be packed separately with labels for site checking.
How to Choose the Right Cold Room Anti-Slip Aluminum Panel
1. Start with temperature and goods type
Start with how the floor is used: workers only, hand carts, pallet jacks, forklifts, wet cleaning, seafood boxes, or restaurant storage. Each condition changes material selection.
2. Confirm surface material and steel thickness
Confirm aluminum plate thickness and whether insulation backing is needed. A wet food room may need better sealing and corrosion review than a dry beverage room.
3. Check joint type, panel width, and maximum length
Check door threshold, floor panel edge, plate overlap, and drainage direction. Poor floor joint design can create trip points or water entry.
4. Match panels with doors and refrigeration layout
The floor must match door frame, ramp, wall panel, and refrigeration drainage. Freezer rooms may also need anti-freeze floor design or vapor barrier planning.
5. Review packing and installation before production
Before shipment, confirm plate dimensions, installation sequence, protective film, and packing method. Floor materials are easy to scratch if stacked without protection.
Why JiangNan
Established in 1997
JiangNan has long-term manufacturing experience in insulated panels, cold room doors, refrigeration components, and complete cold room projects. This helps the quotation team check panel thickness, door type, refrigeration capacity, packing volume, and installation details together instead of treating each item separately.
20,000 m² Manufacturing Facility
The factory supports panel production, door assembly, hardware preparation, trial fitting, packing, and container loading. For export orders, drawings, material lists, and packing plans are checked before shipment to reduce missing parts and installation delay at site.
150+ Employees
Production, technical, sales, and after-sales teams work together on room layout, panel cutting, door opening, refrigeration matching, and accessories. Practical factory communication is important when the customer only has room size, product type, target temperature, and destination country at quotation stage.
OEM, ODM, and Export Support
OEM and ODM cooperation is available for distributors and contractors. JiangNan can provide complete cold room solutions, including panels, doors, air coolers, condensing units, accessories, packing lists, and installation guidance for overseas projects.
Related Products and Articles
Cold Room Panel
PU or PIR insulated panels with cam lock joint for chiller, freezer, and warehouse construction.
Cold Room Sliding Door
Manual sliding door selection for low-temperature and high-traffic cold rooms.
Electric Sliding Door
Motorized sliding door for frequent forklift traffic and logistics warehouses.
Ceiling Type Air Cooler
Air cooler selection for compact cold rooms and standard storage areas.
Cold Storage Warehouse Guide
Warehouse layout, insulation, door, dock, refrigeration, and energy design guidance.
Cold Room Temperature Guide
Temperature ranges for food, seafood, meat, vegetables, dairy, and pharmaceutical storage.
FAQ
What information is needed to quote Cold Room Anti-Slip Aluminum Panel?
Please send the country, required temperature, room size or panel quantity, panel thickness, steel thickness, surface material, joint type, maximum panel length, and whether accessories or doors are needed. These details allow JiangNan to check production feasibility, packing volume, and container loading.
How should the panel thickness be selected?
Floor surface thickness should be selected by traffic load, cart wheel type, cleaning method, and whether the aluminum is used alone or as part of an insulated floor panel. Thickness should also consider ambient temperature, door opening frequency, installation location, and long-term energy cost.
What steel thickness is available?
Common steel thickness is 0.4 mm to 0.8 mm, with thicker steel available for stronger impact resistance. Stainless steel, color steel, embossed aluminum, or other surfaces can be selected according to cleaning, corrosion, and traffic conditions.
What is the normal PU or insulation density?
If supplied with insulation backing, density follows the insulation material specification. If supplied as plate only, density is not the main selection item. Density and core quality should be confirmed with the final quotation because insulation performance and panel strength both affect cold room operation.
Can panel length be customized?
Yes. Panel length can be customized according to room height, ceiling span, container loading, and site handling ability. Very long panels reduce joints but are harder to unload and install, so shipping and installation should be checked together.
What joint type is recommended?
Floor joints should reduce trip risk, water entry, and thermal bridging. Sealing details are important in wet or freezer applications. The joint must provide tight connection, easy installation, and reliable sealing after the room is in operation.
Can JiangNan provide panel layout drawings?
Yes. For cold room projects, JiangNan can prepare layout suggestions showing wall panels, ceiling panels, corners, door openings, and accessories. This helps the customer count materials and guide installers at site.
How are panels protected for export?
Panels are protected with film, stacked according to thickness and length, and packed for container loading. Small accessories, locks, sealant, hardware, and installation materials should be packed with clear labels and checked before shipment.
Which surface material is best for food cold storage?
Embossed aluminum improves slip resistance, but heavy forklift areas may need stronger floor design or additional protection. The choice depends on stored goods, cleaning method, humidity, salt, chemical exposure, and impact risk.
Does this product work with JiangNan cold room doors?
Yes. The panel thickness and joint design can be matched with hinged doors, sliding doors, electric sliding doors, and special door frames. Door opening dimensions should be confirmed before panel production.